Hanger types

Custom Logo Hangers

Your brand cut into the wood. The primary method is laser engraving with gold fill — the mark is engraved then filled with gold, so it reads with depth and contrast on any wood tone. Metal nameplates, pad printing and hot stamping are also quoted.

  • Engraving
  • Metal plate
  • Hot stamping
  • Artwork proof

Models

Available models

The method matters more than the logo: pick by handling, not by sample photo.

Round-Head Engraved Logo Hanger

Round-Head Engraved Logo Hanger

Rounded-head body with an engraved logo — the format most often specified for boutique retail.

View range →
Plated Logo Clip Bar Hanger

Plated Logo Clip Bar Hanger

Clip-bar hanger with a metal nameplate — the method that survives the hardest handling.

View range →

Specification

Typical specification

ParameterValue
Logo methodsLaser engraving with gold fill (standard) / bare engraving / metal nameplate / pad printing / hot stamping
MaterialBeech, lotus or mixed solid wood (seven species available)
Engraving areaFlat outer face, 40–90 mm
ArtworkVector (AI / EPS / PDF), proofed before production
Plate dieOne-off cost, quoted separately
HookChrome-plated iron
MOQ150 pcs per model
Lead time25–35 days after artwork approval
SamplingPre-production sample on request
Indicative priceUS$2.88–3.75 / pc
Overall thickness4.5 cm
Panel thickness12–14 mm

What matters

Selection points

01

Gold-filled engraving first

Our main method is laser engraving with gold fill: the cut is filled so the mark reads on beech, lotus, ash, balata, birch, cedar or walnut.

02

Proofs before production

No hanger is cut until artwork is approved in writing.

03

Claims we can support

Every number in our specification is one we can measure on a sample, and every scope decision is written into the quotation.

Hardware

Hooks and clamps — the full range

The hanger body is one decision; the hardware is another. Nine hook finishes, sixteen hook shapes and fifteen clamp shapes are quoted on the same body.

09

Hook finishes

Chrome, pearl nickel, antique brass, antique copper, brass, electrophoretic black, gun metal, gold and rose gold.

See the finishes
16

Hook shapes

Round wire for retail rails; wider profiles for hotel wardrobe rods and easier grip.

See the shapes
15

Clamp shapes

Solid wood clamps hold a crease; padded metal clamps hold denim and heavier fabric.

See the clamps
01

One body, your choice

All hardware is fitted on the same hanger body, so the specification stays short.

Customized service

Have a specification to check against these criteria? Get a written quotation →

FAQ

Frequently asked questions

Which logo method should I choose?
Laser engraving with a gold fill is our standard — it reads on any wood tone and needs no die. A metal plate and hot stamping are quoted beside it; the three differ in how the mark ages, not only in cost.
Do you charge for artwork?
Proofing is included. Metal nameplate dies are a one-off cost, quoted separately before you commit.
Can you produce a pre-production sample?
Yes — a sample is made against approved artwork before the bulk run.

Request a Custom Wooden Hanger Quotation

Five fields are enough for a written quotation: who you are, where to reply, which line, and what the project needs.

WhatsApp

No account is created and nothing is stored on this site — the form opens your email app or WhatsApp with the details filled in.

WhatsApp +86 135 2785 6939 · WeChat lukefde · [email protected]

Chat with us