Customized service

Customized wooden hanger service, from your sketch to a production-ready range

Luxury OEM and ODM programmes for hotels, retail and private label — specification, sample, finishing, packing and shipment, with every option you can change shown below.

  • 5 logo methodslaser + gold standard
  • 7 finishesstain + top coat
  • 7 woodswalnut included
  • Sampling 7–15days

What we do

Hangers made to a specification, or built with you

Charming Crafts manufactures luxury solid wood hangers as OEM (to your specification) or ODM (specification developed with us), covering sampling, profile development, wood and finish, logo work, assembly, inspection and packing.

We manufacture solid wood hangers to a buyer's specification (OEM) or develop the specification with the buyer from a garment, a reference hanger or a store concept (ODM). Both routes end in the same place: an approved sample, a fixed board and finish, and a batch record so the next order matches this one.

Everything you can change is shown below — the mark, the finish, the wood, the hook and the clamp — followed by the six services, the reference timeline and the parameters we quote against.

Two starting points

OEM and ODM, side by side

What you bringWhat we doTypical start
A written specification: wood, shoulder, body, finish, logo, packingQuote the six fields, sample against the sheet, manufacture to the approved sampleA sheet or an existing hanger
A brief: garments, store concept, budget or a reference hangerDevelop the specification with you — profile, wood, finish, logo method — then sampleA conversation and one garment
An existing programme to matchMatch the current hanger where the tooling allows, or quote a close equivalent with the differences statedA physical sample of the current hanger

Logo

Five ways to put a brand on wood

The mark is applied after the finish has cured, so the contrast stays crisp. Laser engraving filled with gold powder holds a fine serif and keeps its tone after years of handling.

Finish

Seven finishes

Each finish is a stain and top-coat combination rather than a paint film, so the grain stays visible. Walnut-coloured stains dominate hotel work and can be applied to several species, not only walnut; natural and vintage suit retail.

Wood

Seven woods, one recommendation

Beech is our first choice for luxury hangers: dense, straight-grained and stable enough to carry a slim shoulder without warping. Lotus is the usual alternative at lower cost; walnut is our darker species for display work; ash, balata, birch and cedar cover specific grain or scent requirements.

Hardware

Nine hook finishes

Nine hook finishes: chrome plated, pearl nickel, antique brass, antique copper, brass, electrophoretic black, gun metal, gold and rose gold
Hooks are plated or coated to match the wood tone or the metalwork of the store fixture.

Hardware

Sixteen hook shapes and fifteen clamps

The hook decides how the hanger sits on the rail and how the garment falls. On trouser and skirt references the clamp carries most of the weight.

Services

Six services, used in combination

01

Specification & sampling

The six fields written down, then a physical sample for approval — 7–15 days.

How customisation works
02

Profile & tooling

New shoulder or body profiles developed from a reference, quoted with the sampling window.

See the profiles
03

Wood, finish & colour

Seven woods including walnut; gloss, matt or satin; colour approved against a retained sample.

What we check
04

Logo & branding

Main method: laser engraving with gold fill. Bare engraving, metal nameplate, pad printing and hot stamping also quoted.

Logo models
05

Assembly & hardware

Hooks, security rings, clips and trouser bars fitted and checked before packing.

Hardware options
06

Packing & labelling

Polybag or wrap-free, cartons labelled per SKU, floor or room block.

Distribution packing

Reference timeline

Working days, not a promise

StageReferenceCan start when
Specification and quotation2–3 daysBrief received
Sampling and approval7–15 daysSpecification agreed
Production25–35 daysArtwork and sample approved
Inspection and packingincluded in productionLine finished
Documents and dispatch1–2 daysPayment terms met
Full cycle, first order40–55 daysBrief to departure

Parameters

The numbers we quote against

ParameterStandard
Minimum orderPer model and colour — confirmed in the quotation
SamplingAgainst the agreed specification, including logo and colour
Bulk productionAfter artwork and sample approval
Trade termsEXW, FOB, CIF, DDP, DDU — Nansha, Shekou or Ningbo
PaymentBank transfer, card or PayPal; USD, EUR, GBP or CAD
PackagingInner bag or film-free with board between shoulders; labelled per SKU, floor or room block

Scope

What is included, and what is quoted separately

A hanger quotation includes specification, sample, production, inspection and standard packing; freight, expedited runs and non-standard packaging are quoted as separate lines.

Included in a hanger quotation: the specification work, the sample, production to the approved sample, inspection against written criteria, and standard packing. Those five items are the service.

Quoted separately: freight and insurance, expedited production when the calendar allows, and any packing or labelling outside the standard options. We list these as separate lines rather than folding them into a unit price, so the comparison between suppliers stays honest.

Timeline

Customisation adds sampling, not production

A new profile or a new nameplate die adds 7–15 days of sampling before the 25–35 day production window starts. Standard wood, standard profile and gold-filled engraving need no tooling, so the sample can usually be made inside a week.

Trade-offs

What each choice costs

DecisionEffect on the order
Lotus instead of beechLower unit cost, darker tone, heavier hand
Walnut instead of beechHighest unit cost; used where the hanger is display
Non-standard shoulder widthNew profile; sample required, adds days
Pantone colour matchBatch sample approval before production
Metal nameplateOne-off die cost, highest durability
Pad printingLower unit cost, flat mark that wears on high-touch areas
Hot stampingLowest unit cost, least durable
Per-room-block labellingAdded packing time, no unit cost change

In practice

Most orders change one thing, not four

The commonest customisation is a standard body with a custom logo — no tooling, sampling inside a week. The 7–15 day sampling window is spent on the minority of orders that need a new shoulder profile or a new nameplate die.

Have a specification to check against these criteria? Get a written quotation →

FAQ

Customized service questions

What is the difference between OEM and ODM here?
OEM means you bring the specification and we manufacture to it. ODM means we develop the specification with you from a garment, a concept or a reference hanger. Both end with an approved sample before production.
Which logo method do you recommend?
Laser engraving filled with gold powder is our standard: it holds a fine serif and keeps its tone after years of handling. Plain engraving, a metal nameplate, pad printing and hot stamping are quoted when the design or the handling calls for them.
Which wood should we choose?
Beech for an even block of colour across 200 rooms; lotus as the value alternative; walnut where the grain should read; ash, balata, birch and cedar for specific grain or scent requirements. The normal, black, light and red walnut options are stains that can also be applied to other species.
Do you develop new profiles?
Yes, from a physical reference or a drawing. A new profile needs a sample run, which is why the sampling window is 7–15 days rather than a same-week answer.
Can one order combine several models?
Yes. Each model needs its own minimum — 150 pcs per model and colour for custom lines, 10 pcs for stock lines — and models can share a container once each minimum is met.
Who owns the design files and the tooling?
The design and the brand artwork remain yours. Tooling made for your programme is not used for another customer, and artwork is treated as confidential.
Can we approve by photo?
No. Colour and engraving depth cannot be approved from a screen; the sample is approved physically under the lighting the hangers will be used in.
Which ports and terms do you ship on?
Nansha, Shekou or Ningbo, under FOB, CIF, EXW, DDP or DDU. Express courier is available for samples.
What is the MOQ for a custom hanger?
150 pieces per model and colour. Models can ship together once each reaches 150.
Can you match our brand colour?
Yes — against a physical sample or Pantone reference, approved on a batch sample first.
Can we change only the logo and keep a standard body?
Yes — that is the most common order: a standard body with a custom logo, no tooling required.
Do you keep the specification for reorders?
Yes — wood, finish, colour and logo depth are recorded so a reorder reproduces the original.

Reviewed by the specification team · Updated November 2026

Request a Custom Wooden Hanger Quotation

Five fields are enough for a written quotation: who you are, where to reply, which line, and what the project needs.

WhatsApp

No account is created and nothing is stored on this site — the form opens your email app or WhatsApp with the details filled in.

WhatsApp +86 135 2785 6939 · WeChat lukefde · [email protected]

Chat with us