Wide-Shoulder Suit Hangers

Eco-Friendly Beech Suit Hanger

Same wide shoulder in a lighter body with an eco-positioned finish, built for programmes that put material sourcing in the tender document.

Eco-Friendly Beech Suit Hanger — solid wood hanger

Model specification

ParameterValue
MaterialSolid beech wood
Shoulder profile42 mm wide-shoulder profile
Body length380 / 420 mm
Overall thickness4.5 cm
Panel thickness12–14 mm
HookChrome-plated iron, 360° swivel
FinishWater-based matte lacquer
Non-slipOptional rubber strip
LogoLaser engraving with gold fill
MOQ150 pcs per model
Indicative priceUS$2.92 / pc at 150 pcs

Features

Why this model

01

Lighter body

Suits lighter fabrics and coat hangers that must not feel heavy in the hand.

02

Water-based finish

Matte lacquer, low sheen, no plastic wrap in the carton unless asked.

03

Matching family

Pairs with our hotel guest-room range for one consistent look across the wardrobe.

Overview

The same profile on a water-based finish

The wide-shoulder beech hanger with a water-based matte lacquer: same 4.5 cm shoulder section and 380/420 mm body, a flatter surface that reads quieter under shop lighting.

This model keeps the 4.5 cm shoulder section and the 380/420 mm body of the standard wide-shoulder hanger, and changes the finish system to a water-based matte lacquer. The result reads slightly flatter than a gloss or satin finish, which suits a store where the hanger should not compete with the garment.

It is chosen where a buyer has a finishing preference rather than a structural one: the shape is the same, the cartons are the same, and the sample stage is the same. What differs is how the surface looks and how it takes a mark.

For a range that mixes models, this one usually sits alongside the standard beech hanger as the matte option rather than replacing it.

In use

Where the matte finish earns its place

01

Quiet retail rails

Where the hanger should recede and let the garment carry the colour.

02

Photography-led ranges

A flatter surface reflects less, which helps a lookbook shot more than a gloss finish.

03

Mixed ranges

One matte model beside gloss models, so a rail does not read as one flat surface.

Sample

What to check on the approval sample

CheckAccept when
Finish sheenmatte as agreed, not satin by accident
Colourmatches the approved sample under the agreed light
Shoulder section4.5 cm, unchanged from the standard model
Panel12–14 mm, no cupping under load
Engraving contrastthe mark reads on the matte surface at the intended size

Ordering

Ordering and packing

150 pcs per model and colour for custom runs; production 25–35 days after artwork approval. Because the shape is unchanged, a buyer switching from the standard model does not need a new profile sample — only a finish sample.

Packing matches the standard model: a 4.5 cm section packs around 20–25 per carton, confirmed in the quotation along with the label rule.

FAQ

Model questions

Does the matte finish wear differently?
A matte lacquer shows handling marks less than a gloss surface, which is one reason it is chosen for busy rails. The panel and the shoulder section are unchanged.
Can I mix this with the standard beech model?
Yes, and most ranges do — but approve both finishes side by side, because a matte and a gloss hanger of the same colour read differently under one light.
Is the wood different?
Same species and same panel thickness; the selection and the finish system are what this model specifies.

Want this model quoted against your own specification? Get a written quotation →

Request a Custom Wooden Hanger Quotation

Five fields are enough for a written quotation: who you are, where to reply, which line, and what the project needs.

WhatsApp

No account is created and nothing is stored on this site — the form opens your email app or WhatsApp with the details filled in.

WhatsApp +86 135 2785 6939 · WeChat lukefde · [email protected]

Chat with us